tranquility

DESCRIPTION

The body is made from an extruded stove enameled aluminum section and fitted with hard coated aluminum end plates having right and left hand threads, these should only be removed using the correct size face spanner.

Vibration is produced by the centrifugal force of the positive and negative unbalanced moments in the rotor. The rotor is supported on two heavy duty pre-lubricated matched sealed bearings. A special high performance grease ensures a long working life.

The inner and outer raceways of the bearings are designed so that the bearings can easily be removed without using special tools.
Maximum temperature 120°C = 250°F Noise level range 60 to 75 dBA

APPLICATION

The GT range of turbine vibrators are particularly suitable for use in the Food and Pharmaceutical industries where exhaust contaminated with oil is unacceptable. No lubrication is required, but clean filtered air is essential.

These vibrators are extremely quiet and produce low noise levels on most applications, thus helping to conform with noise regulations.

STAINLESS STEEL

STAINLESS STEEL Models GT 10, GT 16, GT 20 and GT 25 are available in stainless steel especially suitable for the use in chemically hazardous applications.

1.    Extruded aluminum alloy body
2.    Alu-Turbine wheel, hard coated
3/4. High density mass positive moment
5/7. Cavities giving negative moment
8.    Air inlet
9.    Air exhaust
10.  Base mounting holes
11.  Special pre-lubricated matched sealed bearings, Alu-Endplates, hard coated
12.  With left-hand thread
13.  With right-hand thread

For more info on Pneumatic Turbine Vibrators, download the document 
  Click Here